====== Raspberry Pi4 Initial Config ======
===== Introduction =====
  * This page will cover the initial configuration of the Raspberry Pi4 running RADIUSdesk.
  * We assume it is plugged into a network with a Huawei LTE Router.
  * We will assign a fixed IP Address of 192.168.8.220 to the Raspberry Pi4.
  * We will also cover the settings on RADIUSdesk that needs to be adjusted to work with this IP Address.

===== Set A Fixed IP Address On Pi4 =====
  * Edit  **/etc/dhcpcd.conf** and make sure the following is specified
<code bash>
sudo vi /etc/dhcpcd.conf
</code>
  * Adapt to fit your environment
<code bash>
interface eth0
static routers=192.168.8.1
static domain_name_servers=192.168.8.1
static ip_address=192.168.8.220
static domain_search=
</code>
  * Reboot the Raspberry Pi4 for the new settings to take effect.

===== Adapt The Settings In MESHdesk =====
  * Use your browser and go to the IP Address of the Raspberry Pi4.
  * Log in. (root / admin)
  * Navigate to **Other** -> **Settings** -> **Default Settings**
  * Change the IP Address specified in **RADIUS-1** and **UAM URL** to match the IP Address of the fixed IP Address of the device.
  * Click **Save**  to apply the changes.

{{:md:initial_settings.png|}}

==== Adapt Sample Demo1 Mesh ====
  * In a similar way edit the **Captive Portal Exit Point** in the Demo1 Mesh (change the IP Address)

==== Adapt Sample Demo1 AP Profile ====
  * In a similar way edit the **Captive Portal Exit Point** in the Demo1 Access Point Profile (change the IP Address)

===== Next Steps =====
  * Congratulations your system is now ready to manage the Access Points.
  * There are dedicated Wiki Pages on how to **flash and point** the Access Points to the server.