RADIUSdesk

Trace:

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision		Previous revision
user_guide:apd_overview [2016/05/09 12:40] – created adminuser_guide:apd_overview [2016/08/15 22:08] (current) – admin
Line 1: Line 1:
 ====== Introduction ====== ====== Introduction ======
 +
 + **MESHdesk** is used to centrally manage various Batman-adv based mesh networks and **APdesk** is used to centrally manage single Access Points.
 +
 +  * If you just signed up a restaurant chain and need to supply WiFi country wide to their 75 locations, then **APdesk is your friend**. These locations are not large enough to justify a mesh network so you just place one Access Point in each branch. But you still need to centrally manage the Access Points deployed in each of these branches. APdesk allows you to manage these distributed Access Points as one group.
 +
   * **APdesk** along with **MESHdesk** is included in **RADIUSdesk**.   * **APdesk** along with **MESHdesk** is included in **RADIUSdesk**.
-  * **MESHdesk** is used to centrally manage various Batman-adv based mesh networks and **APdesk** is used to centrally manage single Access Points. + 
-  * If you just signed up a restaurant chain and need to roll out country wide to their 75 locations a hotspot solution then **APdesk is your friend**. +  * Both **APdesk** and **MESHdesk** depend on the **MESHdesk** firmware. 
-  * These locations are not large enough to justify a mesh network, however we do have a need to centrally manage the Access Points deployed in each of these branches.+ 
 +The **MESHdesk** firmware has various modes it can be set to by using the **MESHdesk Node Config Utility**. 
 + 
 +    * To use the firmware in **APdesk** we simply set the firmware in AP mode. 
 + 
 +    * To use the firmware in **MESHdesk** we set the firmware in Mesh mode. 
  
 <WRAP center round tip 90%> <WRAP center round tip 90%>
   * We are not restricted to exclusively use **APdesk** or **MESHdesk** and we can use a combination of mesh networks and single Access Points to deliver our solution.   * We are not restricted to exclusively use **APdesk** or **MESHdesk** and we can use a combination of mesh networks and single Access Points to deliver our solution.
 +
   * Should there be locations which require a mesh network due to the need for larger coverage, we can roll out a mesh network in these locations.   * Should there be locations which require a mesh network due to the need for larger coverage, we can roll out a mesh network in these locations.
 +
   * Both single Access Points and mesh networks can use common elements like **Realms**, **Dynamic Login Pages**, **Permanent Users** and **Vouchers**.   * Both single Access Points and mesh networks can use common elements like **Realms**, **Dynamic Login Pages**, **Permanent Users** and **Vouchers**.
 +
   * This allow you to choose which type of solution to provide at a location with the minimum duplication.   * This allow you to choose which type of solution to provide at a location with the minimum duplication.
 +
   * It also allow for easy upgrade or downgrade between the two.   * It also allow for easy upgrade or downgrade between the two.
 </WRAP> </WRAP>
  
  
Last modified: 2016/05/09 12:40