This is an old revision of the document!
Table of Contents
LTE Connection On MESHdesk and APdesk
Introduction
- You can select one of three technologies to connect an Access Point to the Internet with MESHdesk and APdesk.
- Ethernet
- Wifi
- LTE/4G
- This page will cover LTE.
LTE Modem in OpenWrt
- You will need a modem that supports the qmi protocol.
- The modem will typically be a pcie card modem or a USB dongle.
- You can get more information around the hardware etc from this page: https://openwrt.org/docs/guide-user/network/wan/wwan/ltedongle
- We assume you installed all the required packages as listed in the link above.
- There packages can also be included with pre-compiled firmware.