Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision Next revision | Previous revision | ||
|
technical:ppp-pppoe-basic [2023/10/14 20:11] admin [Is there a problem?] |
technical:ppp-pppoe-basic [2023/10/15 06:56] (current) admin [Connecting a Client] |
||
|---|---|---|---|
| Line 39: | Line 39: | ||
| mtu=1400 | mtu=1400 | ||
| mru=1400 | mru=1400 | ||
| - | # | ||
| - | #pcomp=deny | ||
| - | #ccp=0 | ||
| - | # | ||
| ipv4=require | ipv4=require | ||
| ipv6=deny | ipv6=deny | ||
| Line 49: | Line 45: | ||
| ipv6-accept-peer-intf-id=1 | ipv6-accept-peer-intf-id=1 | ||
| lcp-echo-interval=20 | lcp-echo-interval=20 | ||
| - | # | ||
| lcp-echo-timeout=120 | lcp-echo-timeout=120 | ||
| unit-cache=1 | unit-cache=1 | ||
| - | # | ||
| [pppoe] | [pppoe] | ||
| verbose=1 | verbose=1 | ||
| - | # | ||
| - | # | ||
| - | # | ||
| - | # | ||
| called-sid=mac | called-sid=mac | ||
| - | #tr101=1 | ||
| - | # | ||
| - | # | ||
| - | # | ||
| - | # | ||
| - | # | ||
| - | # | ||
| - | # | ||
| - | # | ||
| - | # | ||
| - | # | ||
| interface=enp0s3 | interface=enp0s3 | ||
| Line 87: | Line 66: | ||
| dae-server=127.0.0.1: | dae-server=127.0.0.1: | ||
| verbose=1 | verbose=1 | ||
| - | #timeout=3 | ||
| - | #max-try=3 | ||
| - | # | ||
| - | # | ||
| - | # | ||
| - | #acct-on=0 | ||
| - | acct-interim-interval=120 | ||
| - | # | ||
| - | # | ||
| - | # | ||
| - | # | ||
| - | # | ||
| [client-ip-range] | [client-ip-range] | ||
| Line 106: | Line 73: | ||
| [ip-pool] | [ip-pool] | ||
| gw-ip-address=192.168.0.1 | gw-ip-address=192.168.0.1 | ||
| - | # | ||
| - | ## | ||
| attr=Framed-Pool | attr=Framed-Pool | ||
| 192.168.0.2-255 | 192.168.0.2-255 | ||
| Line 120: | Line 85: | ||
| log-emerg=/ | log-emerg=/ | ||
| log-fail-file=/ | log-fail-file=/ | ||
| - | # | ||
| - | # | ||
| - | # | ||
| copy=1 | copy=1 | ||
| - | #color=1 | ||
| - | # | ||
| - | # | ||
| - | # | ||
| level=3 | level=3 | ||
| Line 133: | Line 91: | ||
| vendor=Mikrotik | vendor=Mikrotik | ||
| attr=Mikrotik-Rate-Limit | attr=Mikrotik-Rate-Limit | ||
| - | # | ||
| - | # | ||
| - | # | ||
| - | # | ||
| - | #latency=50 | ||
| - | #mpu=0 | ||
| - | #mtu=0 | ||
| - | #r2q=10 | ||
| - | # | ||
| - | # | ||
| - | # | ||
| - | #ifb=ifb0 | ||
| up-limiter=police | up-limiter=police | ||
| down-limiter=tbf | down-limiter=tbf | ||
| - | # | ||
| - | # | ||
| - | # | ||
| - | #fwmark=1 | ||
| - | # | ||
| - | # | ||
| - | # | ||
| verbose=1 | verbose=1 | ||
| Line 160: | Line 99: | ||
| telnet=127.0.0.1: | telnet=127.0.0.1: | ||
| tcp=127.0.0.1: | tcp=127.0.0.1: | ||
| - | # | ||
| - | # | ||
| </ | </ | ||
| Line 371: | Line 308: | ||
| 261 36732 MASQUERADE | 261 36732 MASQUERADE | ||
| </ | </ | ||
| + | |||
| + | ===== Connecting a Client ===== | ||
| + | * Everything is now set up and ready for the first client to connect. | ||
| + | * We will use OpenWrt with the following /// | ||
| + | * The PPPoE username is '' | ||
| + | <code bash> | ||
| + | |||
| + | config interface ' | ||
| + | option device ' | ||
| + | option proto ' | ||
| + | option ipaddr ' | ||
| + | option netmask ' | ||
| + | |||
| + | config device | ||
| + | option name ' | ||
| + | option type ' | ||
| + | list ports ' | ||
| + | |||
| + | config interface ' | ||
| + | option device ' | ||
| + | option proto ' | ||
| + | option username ' | ||
| + | option password ' | ||
| + | </ | ||
| + | * This device has to be connected to the **same network** (broadcast domain) where our Accel-ppp server is running in order for the network packets to reach the PPPoE server. | ||
| + | |||
| + | ===== Checking The Log File ===== | ||
| + | * The Accel-ppp log file will give us more feedback when a client connects. | ||
| + | * Run the following command | ||
| + | < | ||
| + | sudo tail -f / | ||
| + | </ | ||
| + | * Here is the output we got | ||
| + | < | ||
| + | [2023-10-15 02: | ||
| + | [2023-10-15 02: | ||
| + | [2023-10-15 02: | ||
| + | [2023-10-15 02: | ||
| + | [2023-10-15 02: | ||
| + | [2023-10-15 02: | ||
| + | [2023-10-15 02: | ||
| + | |||
| + | </ | ||
| + | |||
| + | ===== Using accel-cmd ===== | ||
| + | * You can get more information on the current running instance of Accel-ppp by using the accel-cmd program. | ||
| + | < | ||
| + | accel-cmd show stat | ||
| + | </ | ||
| + | * Results in the following in our case | ||
| + | < | ||
| + | accel-cmd show stat | ||
| + | uptime: 0.08:17:34 | ||
| + | cpu: 0% | ||
| + | mem(rss/ | ||
| + | core: | ||
| + | mempool_allocated: | ||
| + | mempool_available: | ||
| + | thread_count: | ||
| + | thread_active: | ||
| + | context_count: | ||
| + | context_sleeping: | ||
| + | context_pending: | ||
| + | md_handler_count: | ||
| + | md_handler_pending: | ||
| + | timer_count: | ||
| + | timer_pending: | ||
| + | sessions: | ||
| + | starting: 0 | ||
| + | active: 1 | ||
| + | finishing: 0 | ||
| + | pppoe: | ||
| + | starting: 0 | ||
| + | active: 1 | ||
| + | delayed PADO: 0 | ||
| + | recv PADI: 4 | ||
| + | drop PADI: 0 | ||
| + | sent PADO: 4 | ||
| + | recv PADR(dup): 4(0) | ||
| + | sent PADS: 4 | ||
| + | filtered: 0 | ||
| + | radius(1, 164.160.89.129): | ||
| + | state: active | ||
| + | fail count: 0 | ||
| + | request count: 0 | ||
| + | queue length: 0 | ||
| + | auth sent: 4 | ||
| + | auth lost(total/ | ||
| + | auth avg query time(5m/ | ||
| + | acct sent: 7 | ||
| + | acct lost(total/ | ||
| + | acct avg query time(5m/ | ||
| + | interim sent: 254 | ||
| + | interim lost(total/ | ||
| + | interim avg query time(5m/ | ||
| + | |||
| + | </ | ||
| + | * To see the current active sessions | ||
| + | < | ||
| + | accel-cmd show sessions | ||
| + | </ | ||
| + | * Result in the following: | ||
| + | < | ||
| + | | ||
| + | --------+----------+-------------------+-------------+------------+-------+------+--------+---------- | ||
| + | | ||
| + | |||
| + | </ | ||
| + | |||
| + | |||
| + | |||
| + | |||
| + | |||