---- ====== Tweak Installation ====== ===== Customised settings ===== * The final part of the installation process involves steps to customise the system to the environment in which it will be used. * Actions are required in three places. * These actions should be performed in the same order as described in this document. * Server-wide settings. * Your first cloud with the setup wizard. * Configuring the overview screen. ===== Server-wide settings ===== * When you log in for the first time after installing RADIUSdesk, the setup wizard is displayed. * In order for the setup wizard to use the configuration specific to your installation, you must first adjust the server-wide settings. * Simply close the setup wizard window. * Go to **Other** -> **Settings**. * The following points are normally adjusted: ==== MESHdesk and APdesk Hardware ==== ^ Item ^ Comment ^ | Password | Change to make more secure | | Country | WARNING: Country setting affect WiFi | | Timezone | Change to your timezone | ==== Captive Portal ==== ^ Item ^ Comment ^ | RADIUS-1 | The IP Address of the RADIUSdesk server | | Shared Secret | WARNING: Changing this also require changing it in a couple of other places | | UAM URL | Use **https** unless the server is on a private IP range then you can use **http** | * After you have made these adjustments, reload the web page so that the setup wizard is displayed again. ===== First cloud with the setup wizard ===== * We recommend that you create a cloud with the name **Dev** or a similar name for development and testing purposes. (You can set up a dev, test and prod cloud, which works well for larger deployments) * The setup wizard has safe defaults and you can just click through on most screens. * Once you have created your first cloud, the final step is to configure the overview screen that appears after logging in. ===== Configure the overview screen ===== * To configure the overview screen, click on the logged-in user drop-down arrow at the top right of the screen. * Select **Settings**. * On the White Labelling tab, you can optionally change some of the default headings and logos. {{ :getting_started:after_wizard.png |}} * After you have made your settings, reload the web page to see the results.