Table of Contents
Tweak Installation
Customised settings
- The final part of the installation process involves steps to customise the system to the environment in which it will be used.
- Actions are required in three places.
- These actions should be performed in the same order as described in this document.
- Server-wide settings.
- Your first cloud with the setup wizard.
- Configuring the overview screen.
Server-wide settings
- When you log in for the first time after installing RADIUSdesk, the setup wizard is displayed.
- In order for the setup wizard to use the configuration specific to your installation, you must first adjust the server-wide settings.
- Simply close the setup wizard window.
- Go to Other → Settings.
- The following points are normally adjusted:
MESHdesk and APdesk Hardware
| Item | Comment |
|---|---|
| Password | Change to make more secure |
| Country | WARNING: Country setting affect WiFi |
| Timezone | Change to your timezone |
Captive Portal
| Item | Comment |
|---|---|
| RADIUS-1 | The IP Address of the RADIUSdesk server |
| Shared Secret | WARNING: Changing this also require changing it in a couple of other places |
| UAM URL | Use https unless the server is on a private IP range then you can use http |
- After you have made these adjustments, reload the web page so that the setup wizard is displayed again.
First cloud with the setup wizard
- We recommend that you create a cloud with the name Dev or a similar name for development and testing purposes. (You can set up a dev, test and prod cloud, which works well for larger deployments)
- The setup wizard has safe defaults and you can just click through on most screens.
- Once you have created your first cloud, the final step is to configure the overview screen that appears after logging in.
Configure the overview screen
- To configure the overview screen, click on the logged-in user drop-down arrow at the top right of the screen.
- Select Settings.
- On the White Labelling tab, you can optionally change some of the default headings and logos.
- After you have made your settings, reload the web page to see the results.