Differences

This shows you the differences between two versions of the page.

--- technical:mikrotik-hotspot [2025/05/13 13:59] – [Converting An Unknown Client] system
+++ technical:mikrotik-hotspot [2025/05/13 15:01] (current) – system
@@ Line 154: / Line 154: @@
 Your Mikrotik Hotspot is now configured. Next we will prepare RADIUSdesk.
+----------------
 ===== Prepare RADIUSdesk =====
@@ Line 167: / Line 169: @@
   * The **New Arrivals - RADIUS** tab is closed by default.
   * To launch it, click the **New Arrivals** button in the **RADIUS Clients** applet.
+<panel type="primary">
 {{:technical:mikrotik:new_arrivals.png|}}
+</panel>
+----------
 ==== On-boarding a new arrival ====
   * After the Mikrotik appeared under the **New Arrivals - RADIUS** tab we can change it to a RADIUS Client.
+<panel type="primary">
+{{:technical:mikrotik:onboarding_1.png|}}
+</panel>
   * Select the new arrival you want to change and click on the **Attach** button.
   * This will bring pop up a window where you can provide some detail.
   * Give it a name:
+<panel type="primary">
+{{:technical:mikrotik:onboarding_2.png|}}
+</panel>
   * The **Monitor** and **Maps** sub-tabs you can leave as default.
-  * The Enhancements tab has some handy enhancements. You are also advised to leave the defaults.
+  * The Enhancements tab has some handy enhancements. You are also advised to enable auto close - We give it a value of one hour (3600 seconds)
+<panel type="primary">
+{{:technical:mikrotik:onboarding_3.png|}}
+</panel>
   * Finally select the realms that can use this RADIUS Client.
-  * After you click the **Next** button this item will be moved to the list of RADIUS Clients. As you can see this item indicates that it never contacted the RADIUSdesk server.
+<panel type="primary">
-  * Simply reboot the Mikrotik to confirm that contact is now established:
+{{:technical:mikrotik:onboarding_4.png|}}
+</panel>
+  * After you click the **Next** button this item will be moved to the list of RADIUS Clients. You will see this item indicates that it never contacted the RADIUSdesk server.
+  * Simply reboot the Mikrotik to confirm that contact is now established.
   *  This brings us to the end of this section.
+-----------
 ==== Testing it out ====
@@ Line 192: / Line 211: @@
   * If things do not work correct; run a debug trace on FreeRADIUS and restart the Mikrotik router.
   * Confirm that the Mikrotik router does send an Accounting-On packet to the RADIUS server by looking at the debug output of the FreeRADIUS server.
+-------------
 ==== What next ====