Differences

This shows you the differences between two versions of the page.

--- technical:pp-openwrt [2025/07/04 15:30] – [WPA2 Enterprise] system
+++ technical:pp-openwrt [2025/07/06 19:58] (current) – [Technical detail] system
@@ Line 7: / Line 7: @@
 ====== WAN through Hotspot 2.0/Passpoint ======
 ===== Introduction =====
+  * Hotspot 2.0/Passpoint uses WPA2/3 Enterprise security to authenticate users.
   * Not all WiFi devices support WPA2 Enterprise security.
-  * WPA2 Enterprise security involves a username and password or certificates.
+  * WPA2 Enterprise security typically involves a username and password or certificates.
   * Most printers, gaming consoles or IoT equipment only support WPA Personal.
   * Should the need arise for them to also join an enterprise network we developed a central managed solution that can act as a bridge.
@@ Line 69: / Line 70: @@
 --------
+==== Building the firmware ====
+  * You can follow the firmware building instructions as stipulated for the normal MESHdesk firmware on OpenWrt.
+  * There are just two deviations:
+    * Use the **wpad-ssl (full)** package instead of **wpad (full)** package under **Network -> WirelessAPD**.
+    * Under the openwrt/files folder, create the **/lib/netifd/** directory.
+    * Copy the /openwrt-meshdesk/passpoint_client/24.10/hostapd.sh file in there as a drop in replacement. This is so that the access point can run a Hotspot 2.0 / Passpoint uplink.
 ==== Passpoint / Hotspot 2.0 ====
   * The /etc/config/wireless part