====== RADIUSdesk Accel-ppp Agent ======
===== Overview =====
  * The **RADIUSdesk Accel-ppp Agent** is a lightweight add-on to Ubuntu or Raspberry Pi devices that serves as a broker between Accel-ppp and RADIUSdesk.
  * It uses a couple of Lua based libraries and scripts to fulfill its mandate.


===== Installation =====
==== Please double check ====
  * Make sure the iptables package is installed. (It was not installed on my Raspberry Pi OS image)
<code bash>
sudo apt-get install iptables
</code>
        * Make sure packet forwarding for IPv4 is enabled. Edit the **/etc/sysctl.conf**.
        * Find and uncomment **net.ipv4.ip_forward=1** line.

==== The Rest ====

  * We assume you already have a device that has Accel-ppp installed as per instructions elsewhere on this Wiki.
  * Install the following packages.
<code bash>
sudo apt-get install -y curl lua-socket lua-cjson luarocks
sudo luarocks install inifile
</code>
  * Check out the latest RADIUSdesk code
<code bash>
cd /var/www
sudo git clone https://github.com/RADIUSdesk/rdcore.git
#Link the accel-ppp agent's files to /etc directory
ln -s /var/www/rdcore/cake4/rd_cake/setup/accel-ppp/MESHdesk /etc/MESHdesk
</code>

===== Configuration =====

==== Startup and config reference files ====
  * Copy the following reference files:
<code bash>
#config file for the agent
sudo cp /etc/MESHdesk/files/accel-ppp-rd.conf /etc/
#startup file. We make a backup first of the original one (of there were one)
cp /etc/rc.local /etc/rd.local.bak
sudo cp /etc/MESHdesk/files/rc.local /etc/
</code>

=== Config File ===

  * Configuration is done by tweaking the ///etc/accel-ppp-rd.conf// file.
  * Refer to the sample below
<code bash>
[internet]
disabled=0
dns=cloud.radiusdesk.com
protocol=https
http_port=80
https_port=443
ip=164.160.89.129

[pppoe]
interface=eth0
</code>
  * In our setup we have a RADIUSdesk server which has a FQDN of cloud.radiusdesk.com
  * We also specify the fallback ip as 164.160.89.129 in the event when DNS does not resolve.
  * Protocol can be either https or http. We choose https which is more secure.
  * We also specify the interface we want the PPPoE service to run on.
  * In our case we have a Raspberry Pi 4 with an Enternet port (eth0) where we will run the PPPoE service on.
  * The agent will then fetch the MAC Address of this interface and forward the request for config to RADIUSdesk using this MAC Address as the unique identifier.
  * Make changes to this file so that it works with your environment and device.

=== Startup File ===
  * Disable automatic startup of Accel-ppp.
<code bash>
sudo systemctl disable accel-ppp
</code>
  * The startup file is ///etc/rc.local//.
  * You also have to tweak it to work on the device running the RADIUSdesk Accel-ppp Agent.
  * Refer to the sample below
<code bash>
#!/bin/bash
iptables -t nat -A POSTROUTING -o wlan0 -j MASQUERADE

cd /etc/MESHdesk

sleep 10
/etc/MESHdesk/u.lua &
sleep 10
/etc/MESHdesk/heartbeat.lua &

exit 0
</code>
  * The important line is the one with the iptables rule for NAT.
  * With our setup the WAN connection / uplink is the WiFi interface, **wlan0**.
  * Make sure that your setup matches your device's configuration.

<WRAP center round info 100%>
Since PPPoE works on Layer2, you can have both the PPPoE and the WAN connection on one physical interface e.g eth0 in our case with the Pi.
</WRAP>
  * On the Raspberry Pi the rc.local script was called automatically during startup.
  * On Ubuntu you'll probably have to follow these instructions to ensure that it starts up during boot time
  * http://radiusdesk.com/wiki/technical/ppp-pppoe-basic#add_masquerade_support_on_wan_enp0s3
  * Everything should now be in place and you can reboot the device and see if it is listed under **Accel-ppp Servers -> New Arrivals** 

==== RADIUS Client ====
  * If your Accel-ppp server is using RADIUSdesk for its RADIUS component you have one last step to do.
  * You can do its RADIUS on-boarding by looking for it under RADIUS -> RADIUS Clients -> New Arrivals.
  * After you completed the on-boarding be sure to specify the Client Type as **Accel-On-RADIUSdesk**.
  * This will allow the code to follow the correct procedure when an active session for a user needs to be terminated.
{{:technical:pppoe:accel-type.png|}}