Differences

This shows you the differences between two versions of the page.

--- install_docker [2026/09/10 23:04] – system
+++ install_docker [2026/09/10 23:34] (current) – [Working with the Docker containers] system
@@ Line 88: / Line 88: @@
 ===== Create the Docker containers =====
-  * Everything you need to create the RADIUSdesk Docker containers is provided by the **rdcore** and **rd_cake5** repositories.
+  * Everything you need to create the RADIUSdesk Docker containers are provided by the **rdcore** and **rd_cake5** repositories.
   * Check out the **rdcore** git repository.
 <code bash>
@@ Line 138: / Line 138: @@
   * Open a browser and call up the IP address of the host on which the Docker containers are running.
+===== Working with the Docker containers =====
+  * The docker containers can be seen as a lightweight Linux machine.
+==== Who is active? ====
+  * To see which docker containers are running:
+<code bash>
+docker ps
+#This was the reply on my machine
+CONTAINER ID   IMAGE               COMMAND                  CREATED             STATUS          PORTS                                                                                                  NAMES
+c99a3eb667b   docker-radiusdesk   "/bin/sh -c '/usr/bi…"   About an hour ago   Up 39 minutes   0.0.0.0:80->80/tcp, [::]:80->80/tcp, 0.0.0.0:1812-1813->1812-1813/udp, [::]:1812-1813->1812-1813/udp   radiusdesk
+d31244   mariadb:11.8        "docker-entrypoint.s…"   About an hour ago   Up 39 minutes   3306/tcp                                                                                               radiusdesk-mariadb
+</code>
+==== Shell access ====
+  * If you like the Linux shell then you will feel at home inside a Docker container.
+  * You can shell into the radiusdesk container with the following command:
+<code bash>
+docker exec -it radiusdesk bash
+</code>
+  * To make a backup of the DB you can issue:
+<code bash>
+mysqldump -h radiusdesk-mariadb -u rd -p --events rd > /tmp/rd.sql
+</code>
+  * There are also a vi editor and the ping command installed for basic editing and network troubleshooting.
+  * To exit out of the docker container simply type **exit**.
+  * You can shell into the radiusdesk-mariadb container with the following command:
+<code bash>
+docker exec -it radiusdesk-mariadb bash
+</code>
+==== Log output ====
+  * Again if you like the fact that you can check log files to confirm everything works well then Docker containers got you covered.
+  * You can run the following command to check the log output of the radiusdesk container:
+<code bash>
+docker logs radiusdesk --tail 20 -f
+</code>
+  * For the log output of radiusdesk-mariadb:
+<code bash>
+docker logs radiusdesk-mariadb --tail 20 -f
+</code>