Differences

This shows you the differences between two versions of the page.

--- install_tweak [2024/04/24 05:32] – [Edit - Panel] system
+++ install_tweak [2024/04/24 06:53] (current) – system
@@ Line 7: / Line 7: @@
 ====== Tweak Installation ======
-===== Custom Settings =====
+===== Customised settings =====
-  * The last part of the install process include steps to make the system fit the environment where it is deployed.
+  * The final part of the installation process involves steps to customise the system to the environment in which it will be used.
-  * Actions in three places are required.
+  * Actions are required in three places.
-  * These actions should be done in the same order as they are discussed in this document.
+  * These actions should be performed in the same order as described in this document.
-        * Server wide settings.
+        * Server-wide settings.
-        * Your first cloud using the setup wizard.
+        * Your first cloud with the setup wizard.
-        * Configuring the home screen.
+        * Configuring the overview screen.
-===== Server wide settings =====
+===== Server-wide settings =====
-  * When you log in for the first time after installing RADIUSdesk, the Setup Wizard will be displayed.
+  * When you log in for the first time after installing RADIUSdesk, the setup wizard is displayed.
-  * In order for the Setup Wizard to use the configuration unique to your install you first have to tweak the server wide settings.
+  * In order for the setup wizard to use the configuration specific to your installation, you must first adjust the server-wide settings.
-  * Simply close the Setup Wizard window.
+  * Simply close the setup wizard window.
   * Go to **Other** -> **Settings**.
-  * The following items are typically adjusted:
+  * The following points are normally adjusted:
 ==== MESHdesk and APdesk Hardware ====
 <panel type="default" no-body="true">
 ^ Item       ^ Comment   ^
-| Password  | Change make more secure |
+| Password  | Change to make more secure |
 | Country  | WARNING: Country setting affect WiFi |
 | Timezone  | Change to your timezone |
@@ Line 37: / Line 37: @@
 | UAM URL  | Use **https** unless the server is on a private IP range then you can use **http** |
 </panel>
+  * After you have made these adjustments, reload the web page so that the setup wizard is displayed again.
+===== First cloud with the setup wizard =====
+  * We recommend that you create a cloud with the name **Dev** or a similar name for development and testing purposes. (You can set up a dev, test and prod cloud, which works well for larger deployments)
+  * The setup wizard has safe defaults and you can just click through on most screens.
+  * Once you have created your first cloud, the final step is to configure the overview screen that appears after logging in.
+===== Configure the overview screen =====
+  * To configure the overview screen, click on the logged-in user drop-down arrow at the top right of the screen.
+  * Select **Settings**.
+  * On the White Labelling tab, you can optionally change some of the default headings and logos.
+{{ :getting_started:after_wizard.png |}}
+  * After you have made your settings, reload the web page to see the results.