network:internet_wifi [RADIUSdesk]

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

<nav type="pills" justified="false">
  * [[:user_manuals|Back to Documentation]]
  * [[:network:internet_wifi|WiFi Client]]
</nav>

-----
====== WiFi Client ======
  * MESHdesk and APdesk allows a device to get its network connection using WiFi.
  * You will first have to connect the device to the network using its Ethernet cable and the WAN port for it to get the initial configuration from the controller (once off action)
  * There will be a visual indication on the device listing if it has a WiFi client configured.
<panel type="primary">
{{:network:internet_wifi-1.png |}}
</panel>
  * Just like with the Ethernet connection, there are a couple of options to connect.
<panel type="primary">
{{:network:internet_wifi.png |}}
</panel>
  * WiFi with static IP-Address support
<panel type="primary">
{{:network:internet_wifi-static.png |}}
</panel>
  * WiFi with PPPoE support
<panel type="primary">
{{:network:internet_wifi-pppoe.png |}}
</panel>
  * When you view the device, it will also report on its signal strength. 
<panel type="primary">
{{:network:internet_wifi-view.png |}}
</panel>