User registration in a PPSK environment

This is an old revision of the document!

RADIUSdesk enables the fast onboarding of new users in a PPSK network.
This page describes the different options you can select to optimise your setup.

For user registration, we use a captive portal with a landing page that enables user registration.
We use a pre-defined pre-shared key (PSK) that dynamically moves the user into the network with the captive portal.
You can decide what role this captive portal should fulfil.
- You can use the captive portal in the traditional way, i.e. users can connect via the portal to gain internet access and have the option to register. The register dialog can include an option for the user to specify their own Private Preshared Key (PPSK).
- Alternatively, you can simply use the Captive Portal as a place where the user can register. During this registration process they can then specify their Private Pre-shared Key (PPSK) which they will give them full Internet access when they use their own preshared key.

In large installations, you can potentially have hundreds of access points, all centrally managed with MESHdesk and APdesk.
In these installations, you need to work with other components to get an integrated solution.
Typically you will have
- A common SSID configured for private PSK security on all access points.
- External / centralised onboarding captive portal.
- Multiple VLAN enabled switches.
- A firewall hosting multiple networks, each connected to a different VLAN.
This includes multi-dwelling units (MDU), schools, hotels and conference facilities as well as WiFi networks with IOT devices.

You may have noticed that the access points in the picture are the Aruba AP105.
RADIUSdesk provides a solution for networks and does not sell hardware.
The Aruba AP105 as well as many other older and current hardware is supported by OpenWrt and can therefore be used in your deployment.
No vendor lock-in

Network setup