RADIUSdesk

Trace: › md_flash_firmware

This is an old revision of the document!

Table of Contents

Steps to flash and configure your Router to work with MESHdesk

These are the steps we will take to get your system working on Meshdesk:

  1. Buy a supported router. The list of supported routers are here- Supported hardware
  2. Download the latest firmware for your router from sourceforge.net here- https://sourceforge.net/projects/radiusdesk/files/MESHdesk/
  3. Start-up Your router in fail-safe mode
  4. Flash the latest MESHdesk firmware onto your router
  5. Download the latest Meshdesk Node Config Utility from here- https://sourceforge.net/projects/radiusdesk/files/MESHdesk/
  6. Configure the router with the MESHdesk Node Config Utility

How to Flash and Configure a ZBT WE2026

Last modified: 2016/06/13 14:15