Failing to set the IP Address on you local machine to 192.168.255.20 will render the utility useless
You can change the IP Address which the node will contact by changing the value specified in /etc/config/meshdesk on the node.
|Last Contact||Just Now||This will initially state “Never Before” during start-up. When the hardware contacts the utility, the background turns green with a counter. After 30 seconds since the last contact the background turns blue|
|Eth0||78-A3-51-15-25-18||This is the MAC Address of Eth0 interface and used as a unique identifier to the back-end|
|Mode||mesh||In mesh mode it is controlled by MESHdesk and in ap mode it is controlled by APdesk|
|Protocol||http||Can be either http or https|
|Server||126.96.36.199||The IP Address of the RADIUSdesk server|
|WPA2 Key||radiusdesk||the WPA2 Key for the hidden ssid meshdesk_config|
No need to save anything to the device. The new values are committed on the fly as soon as the device makes contact with the utility.